Ultralight Control Systems

The DB-CB10 is a 10" double ball flat crossbar with 1/4" mounting holes for underwater photography and videography.

Ultralight Control Systems is known for quality parts, especially their double ball arms. These arms are practically indestructible and you will only need to buy them once. Depending on the photography or the application you plan to use them on, we have several sizes to pick from. The arms do not need to be the same length and you can mix and match them depending on what you plan to do. For the BEST flexibility we recommend two arms and three clamps.

All arms are measured from the center of the O-ring to the center of the O-ring and the ball size is 1″.

Dimensions: 11" x 1" x 1"

Ultralight Control Systems has been serving the underwater photography and cinematography industry since 1995. Their products serves the cine industry as well as amateurs with a love for underwater photography. ULCS has camera trays for just about any housing for both video or still photography.

Ultralight Control Systems manufactures sturdy lightweight machined aluminum camera, video, and monitor accessories such as arms, clamps, trays, base adaptors, handles, monitor mounts, assorted brackets, and more.

Please watch the video on how to use our new DB-CB10 arm!

All of the parts are aircraft-grade aluminum (6061), each piece is machined from billet aluminum, polished, and then hard anodized to government specifications. ULCS anodizes all of their parts to make sure they will hold up to the harshest environments. All black parts have Type 3 hard anodizing and the colored parts, in green, red and blue have Type 2. The main difference between Type 3 and Type 2 anodizing is that Type 3 has a thicker anodized coating, is more durable, and has higher corrosion resistance to dissimilar metals than Type 2. 

All ULCS products are manufactured & assembled in the USA using US materials.

🇺🇸 Made in the USA

AC-LYC Camera lanyard in 2 sizes:

Top: AC-LY20 20 ” lanyard with 3/8″ 316 stainless bolt snaps, size: 20"x1"x1"

Bottom: AC-LY24 24 ” lanyard with 3/8″ 316 stainless bolt snaps, size: 24"x1"x1"

Camera lanyards are a great addition to any camera rig. They make it easier to carry the camera around and to hand it from person to person without dropping or damaging them.

This camera quick disconnect was designed with cold water diving in mind while wearing dry gloves. The split ring, coiled cable and stage bottle bolt snap are all 316 stainless. The coiled cable is shorter than most and secured by aluminum crimps. It was designed so that even if the buckle failed for any reason, it would still stay connected to you.

Dimensions: 12.5" x 3.5" x 1"

Ultralight Control Systems has been serving the underwater photography and cinematography industry since 1995. Their products serves the cine industry as well as amateurs with a love for underwater photography. ULCS has camera trays for just about any housing for both video or still photography.

Ultralight Control Systems manufactures sturdy lightweight machined aluminum camera, video, and monitor accessories such as arms, clamps, trays, base adaptors, handles, monitor mounts, assorted brackets, and more.

Watch the video to find out more about camera lanyards and parts!

All of the parts are aircraft-grade aluminum (6061), each piece is machined from billet aluminum, polished, and then hard anodized to government specifications. ULCS anodizes all of their parts to make sure they will hold up to the harshest environments. All black parts have Type 3 hard anodizing and the colored parts, in green, red and blue have Type 2. The main difference between Type 3 and Type 2 anodizing is that Type 3 has a thicker anodized coating, is more durable, and has higher corrosion resistance to dissimilar metals than Type 2. 

All ULCS products are manufactured & assembled in the USA using US materials.

🇺🇸 Made in the USA

 The AC-LH2 is a pair of bolt on 316 stainless lanyard holders with hardware.

Size: 4" x 2" x 0.5"

Camera lanyards are a great addition to any camera rig. They make it easier to carry the camera around and to hand it from person to person without dropping or damaging them. Ultralight offers several options for mounting camera lanyards along with their own design, high quality camera quick clip lanyard.

Ultralight Control Systems has been serving the underwater photography and cinematography industry since 1995. Their products serves the cine industry as well as amateurs with a love for underwater photography. ULCS has camera trays for just about any housing for both video or still photography.

Ultralight Control Systems manufactures sturdy lightweight machined aluminum camera, video, and monitor accessories such as arms, clamps, trays, base adaptors, handles, monitor mounts, assorted brackets, and more.

Watch the video to find out more about camera lanyards and parts!

All of the parts are aircraft-grade aluminum (6061), each piece is machined from billet aluminum, polished, and then hard anodized to government specifications. ULCS anodizes all of their parts to make sure they will hold up to the harshest environments. All black parts have Type 3 hard anodizing and the colored parts, in green, red and blue have Type 2. The main difference between Type 3 and Type 2 anodizing is that Type 3 has a thicker anodized coating, is more durable, and has higher corrosion resistance to dissimilar metals than Type 2. 

All ULCS products are manufactured & assembled in the USA using US materials.

🇺🇸 Made in the USA

The AC-LHC2 is a pair of 316 stainless clamp lanyard holders with hardware-fits any 1/4′ clamp bolt.

Size: 4" x 2.5" x 0.5"

Camera lanyards are a great addition to any camera rig. They make it easier to carry the camera around and to hand it from person to person without dropping or damaging them. Ultralight offers several options for mounting camera lanyards along with their own design, high quality camera quick clip lanyard.

Ultralight Control Systems has been serving the underwater photography and cinematography industry since 1995. Their products serves the cine industry as well as amateurs with a love for underwater photography. ULCS has camera trays for just about any housing for both video or still photography.

Ultralight Control Systems manufactures sturdy lightweight machined aluminum camera, video, and monitor accessories such as arms, clamps, trays, base adaptors, handles, monitor mounts, assorted brackets, and more.

Watch the video to find out more about camera lanyards and parts!

All of the parts are aircraft-grade aluminum (6061), each piece is machined from billet aluminum, polished, and then hard anodized to government specifications. ULCS anodizes all of their parts to make sure they will hold up to the harshest environments. All black parts have Type 3 hard anodizing and the colored parts, in green, red and blue have Type 2. The main difference between Type 3 and Type 2 anodizing is that Type 3 has a thicker anodized coating, is more durable, and has higher corrosion resistance to dissimilar metals than Type 2. 

All ULCS products are manufactured & assembled in the USA using US materials.

🇺🇸 Made in the USA